跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#3

Lauren Mannix编辑

编辑已通过 由 Lauren Mannix

之前
之后
不变

步骤行

[* black] Disconnect the wire that connects the back cover of the dino to the main circuit board by carefully pulling on the orange wire connector with tweezers.
[* black] Remove back cover.
[* icon_note] If you are having difficulty removing the connector from its socket, push in the small tabs on the side of the connector with the tweezers. This step may take some work.
[* icon_caution] Be carefulDo not to damage the wires or the circuit board.
[* icon_caution] Be carefulDo not to damage the wires or the circuit board.