跳到这一步
由 Nicholas Abate — 编辑
编辑已通过 由 Nicholas Abate
- 之前
- 之后
- 不变
步骤行
| [* black] Pry the black casing off from the rest of the camera. | |
| [* icon_note] Start the prying process by prying the casing over the tripod mount, then continue to pry around the rest of the camera. | |
| - | [* icon_caution] Be gently when prying the casing off. There are |
| - | [* black] Pull gently on the |
| + | [* icon_caution] Be gently when prying the casing off. There are ribbon cables that connect the LCD display to the motherboard. This ribbon cable must be disconnected before the case and camera can be separated. |
| + | [* black] Pull gently on the ribbon cable as close to the connector as possible to disconnect the cable. |