跳到步骤＃6
由 Kristen Gismondi — 编辑
编辑已通过 由 Kristen Gismondi
- 之前
- 之后
- 不变
步骤行
| - | [* red] Use the tip of a spudger to disconnect the [guide|25629|ZIF connector|stepid=64969|new_window=true] on the left side of the camera. The ribbon cable on this device was torn in the process of removing the back case, so there are no photos showing this step. |
|---|---|
| + | [* red] Use the tip of a spudger to disconnect the [guide|25629|ZIF connector|stepid=64969|new_window=true] on the left side of the camera. |
| + | [* icon_note] The ribbon cable on this device was torn in the process of removing the back case, so there are no photos showing this step. |
| [* orange] Disconnect the ribbon cable securing the rear case to the motherboard. | |
| [* black] Separate the rear case from the camera. |