跳转到主内容

跳到步骤#11

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

-[* black] Insert wisdom here.
+[* black] Use the edge of a plastic opening tool to gently pry up the display assembly around its perimeter.
+[* black] Remove the display assembly from the iPhone.
+[* icon_caution] When reinstalling the display assembly, be sure the digitizer and display data cables are completely pulled through the slot cut into the outer case before pressing the display assembly down into the outer case. Failure to do so will cause the digitizer cable to not reach its socket on the logic board.