跳转到主内容

跳到步骤#8

Ayla Palacios编辑

编辑已通过 由 Ayla Palacios

已删除
已添加
不变

步骤行

[* black] The plastic carriers only fit one way when refitting them intointo the tail light carriertaillight carrier one way. The fit is very snug against the metal ground.
[* black] Line upAlign the two plastic tabs with the indents in the metal sheet. Push hard inwards and twistinward while twisting clockwise until the bulb turns until it is horizontal, similar to the other four bulbs. YouWhen the bulb fits correctly, you will hear a loud snap when the bulb is fitted correctlysnap.
[* black] The plastic carriers only fit one way when refitting them intointo the tail light carriertaillight carrier one way. The fit is very snug against the metal ground.
[* black] Line upAlign the two plastic tabs with the indents in the metal sheet. Push hard inwards and twistinward while twisting clockwise until the bulb turns until it is horizontal, similar to the other four bulbs. YouWhen the bulb fits correctly, you will hear a loud snap when the bulb is fitted correctlysnap.
[* icon_note] Note: The bulb carrier is very hard to place correctly. Ensure the tabs are lined up, and apply hard pressure while turning clockwise. If the bulb carrier does not sit, remove it and reseat it.