跳到步骤#8
由 Kristian Hayward — 编辑
编辑已通过 由 Kristian Hayward
- 已删除
- 已添加
- 不变
步骤行
[* black] The plastic carriers only fit one way when refitting them into the tail light carrier. The fit is very snug against the metal ground. |
[* black] Line up the two plastic tabs with the indents in the metal sheet. Push hard inwards and twist clockwise until the bulb turns until it is horizontal, similar to the other four bulbs. |
[* icon_note] Note: The bulb carrier is very hard to place correctly. Ensure the tabs are lined up, and apply hard pressure while turning clockwise. If the bulb carrier does not sit, remove it and reseat it. |