跳转到主内容

跳到步骤#8

Ayla Palacios编辑

编辑已通过 由 Ayla Palacios

已删除
已添加
不变

步骤行

[* black] The plastic carriers only fit into the taillight carrier one way. The fit is very snug against the metal ground.
[* black] Align the two plastic tabs with the indents in the metal sheet. Push hard inward while twisting clockwise until the bulb is horizontal, similar to the other four bulbs. When the bulb fits correctly, you will hear a loud snap.
[* icon_note] Note: The bulb carrier is very hard to place correctly. Ensure the tabs are lined up, and apply hard pressure while turning clockwise. If the bulb carrier does not sitsit properly, remove it and reseat it.
[* icon_note] Note: The bulb carrier is very hard to place correctly. Ensure the tabs are lined up, and apply hard pressure while turning clockwise. If the bulb carrier does not sitsit properly, remove it and reseat it.