跳转到主内容

跳到步骤#8

Kristian Hayward编辑

编辑已通过 由 Kristian Hayward

已删除
已添加
不变

步骤行

[* black] The plastic carriers only fit one way when refitting them into the tail light carrier. The fit is very snug against the metal ground.
[* black] Line up the two plastic tabs with the indents in the metal sheet. Push hard inwards and twist clockwise until the bulb turns until it is horizontal, similar to the other four bulbs.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加