跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#4

Zack Hoover编辑

编辑已通过 由 Zack Hoover

之前
之后
不变

步骤行

[* black] To remove the sensor assembly, simply peel off the lens towards the attached ribbon cable.
[* red] The sensor has ribbon cables running to the motherboard via a black rectangular connector.
[* red] To remove the sensor, use the spudger to pry onup each side, Then, lift the black rectangle to remove a set of pinsconnector straight up from the motherboardits socket.
[* red] To remove the sensor, use the spudger to pry onup each side, Then, lift the black rectangle to remove a set of pinsconnector straight up from the motherboardits socket.
[* black] With the old camera sensor assembly removed, you can now replace it with a new sensor.