跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#4

Garrett Sloop编辑

编辑已通过 由 Garrett Sloop

之前
之后
不变

步骤行

[* black] To remove the sensor assembly simply peel off the lens towards the attached ribbon cable.
[* red] The sensor has ribbon cables running to the motherboard via a black rectangular connector.
[* blackred] To remove the sensor, pry on the black rectangle to remove a set of pins from the motherboard (marked in red)motherboard.
[* blackred] To remove the sensor, pry on the black rectangle to remove a set of pins from the motherboard (marked in red)motherboard.
[* black] With the old camera sensor assembly removed, you can now replace it with a new sensor.