跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#2

Zack Hoover编辑

编辑已通过 由 Zack Hoover

之前
之后
不变

步骤行

[* black] To remove the motherboard assembly from the camera casing, use athe plastic opening tool on the lens side of the camera to pry the motherboard assembly out of the camera housing.
[* black] To remove the motherboard assembly from the camera casing, use athe plastic opening tool on the lens side of the camera to pry the motherboard assembly out of the camera housing.
[* black] To avoid breaking the plastic on the lens side of the camera (see photo), pry along the edges near the corners.
[* icon_note] Try using the plastic opening tool before switching to the metal spudger. We tried using the plastic opening tool to pry the motherboard assembly open, but found that it did not give us enough leverage. Be aware that using the metal spudger can break the camera.
[* icon_caution] Do not try to pry onnear the power button side of the camera. This will break important cables inside.
[* icon_caution] Do not try to pry onnear the power button side of the camera. This will break important cables inside.