跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#2

Zack Hoover编辑

编辑已通过 由 Zack Hoover

之前
之后
不变

步骤行

[* black] To get the bulk of the camera away from its casing, use a ----plastic opening tool on the lens side of the camera to pry itthe logic board assembly out of the plasticcamera housing.
[* black] To get the bulk of the camera away from its casing, use a ----plastic opening tool on the lens side of the camera to pry itthe logic board assembly out of the plasticcamera housing.
[* black] To avoid breaking the plastic on the right side of the camera (see photo), pry along the edges near the corners.
[* black] Try using the plastic opening tool before switching to the metal spudger. We tried using the plastic opening tool to pry the logic board assembly open, but found that it did not give us enough leverage. Be aware that using the metal spudger can break the camera.
[* icon_caution] Do not try to pry on the left side of the camera (where the power/mode button is. This will break important cables inside.