跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#1

Zack Hoover编辑

编辑已通过 由 Zack Hoover

之前
之后
不变

步骤行

[* red] Using a screwdriver, remove all four 8mm Phillips head screws on each corner of the camera.
[* red] Note that one screw will be shorter than the other three (4 mm). Make sure to reinstallreinsert the shorter screw to the bottom left handleft-hand corner.
[* red] Note that one screw will be shorter than the other three (4 mm). Make sure to reinstallreinsert the shorter screw to the bottom left handleft-hand corner.