跳转到主内容

修复你的物品

维修的权力

商店

跳到这一步

Zack Hoover编辑

编辑已通过 由 Zack Hoover

之前
之后
不变

步骤行

[* black] Start by removing the silver plastic face from the camera using a plastic opening tool. Insert the plastic opening tool into the middle of each edge and lift up the tabs that keep the camera face on.
[* icon_note] Try using the plastic opening tool before switching to the metal spudger. We tried using the plastic opening tool to pry the camera face off, but found that it did not give us enough leverage. Be aware that using the metal spudger can break the camera
[* icon_caution] There may be glue holding the camera face on to the housing. Be careful not to flex the camera face too much, or it will crack.