跳到步骤＃14
由 Andrew Optimus Goldheart — 编辑
编辑已通过 由 Andrew Optimus Goldheart
- 之前
- 之后
- 不变
步骤行
| [* icon_note] The logic board is still attached to the computer by one more cable, so don't lift the logic board too far out of the computer yet. |
| [* black] Grasp the logic board at the left side and at the thin section, and rotate the logic board out of the lower case. |
| [* icon_note] To properly reassemble your MacBook Pro, you'll have to clean off and replace the old thermal compound from the chips on the back of the logic board. Use our [guide|744|Applying Thermal Paste Guide] to prepare the processor and heat sink surfaces. |