修复你的物品 社区 商店

跳到步骤＃1

由 Jaia Craig — 编辑

编辑已通过 由 Jaia Craig

之前
之后
不变

步骤行

-[* black] Open the Visor Edge and place it on a table facing down.
-[* red] Gently push the tab that connects the flip cover (top half) to the PDA (bottom half) upward, and lift the pieces apart to detach them.
-[* icon_caution] Do not pull on the flip cover in an attempt to remove it from the PDA.
+[* black] Open the Visor Edge placing the screen and the inner part of the flip cover face down on a flat surface such as a table
+[* red] On the back of the PDA there is a tab connecting the flip cover to the device. Push gently on this tab trying to slide the cover upwards along the surface then lift the pieces apart to fully detach them
+[* icon_caution] Do not pull or tug on the flip cover in an attempt to remove it from the PDA this can result in the cover snapping causing damage to the device