跳转到主内容

跳到步骤#5

Sam Goldheart编辑

编辑已通过 由 Sam Goldheart

之前
之后
不变

步骤行

-[* black] Time to try the top again. After some prying on what we thought was a solid top, it turns out to be the way in.
-[* black] We really wish this thing came with a repair manual—this cap should have been the first to go.
-[* black] We successfully get the top off this can ~~of worms~~, and the first component out is the LED board with some control hardware:
+[* black] We turn our attention back to what we thought was a solid top, it turns out this was the way in all along.
+ [* icon_note] We really wish this thing came with a repair manual—this cap ''should'' have been the first to go.
+[* black] We successfully get the top off this can ~~of worms~~, and the first component we spy is the LED board with some control hardware:
[* red] National Semiconductor [http://datasheet.octopart.com/LP5523TM/NOPB-National-Semiconductor-datasheet-10100337.pdf|LP5523|new_window=true] Programmable 9-Output LED Driver
-[* black] Stacked beneath the light ring, we find the highly anticipated congestion-sensing antenna and radio.
+[* black] Stacked beneath the light ring, we find the highly anticipated congestion-sensing antenna and radio. But we can't get it out just yet...