跳转到主内容

跳到步骤#5

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

[* black] We turn our attention back to what we thought was a solid top, it turns out this was the way in all along.
[* icon_note] We really wish this thing came with a repair manual—this cap ''should'' have been the first to go.
-[* black] We finally pop the top off this can ~~of worms~~, and the first component we spy is the LED board with some control hardware:
- [* red] National Semiconductor [http://datasheet.octopart.com/LP5523TM/NOPB-National-Semiconductor-datasheet-10100337.pdf|LP5523|new_window=true] Programmable 9-Output LED Driver
+[* black] We finally pop the top off this can ~~of worms~~, and the first component we spy is the famed congestion-sensing antenna.
+[* black] We can't quite remove it yet, so leaving that to dangle gently to the side exposes the LED board with some control hardware:
+ [* red] National Semiconductor [http://datasheet.octopart.com/LP5523TM/NOPB-National-Semiconductor-datasheet-10100337.pdf|LP5523|new_window=true] programmable 9-output LED driver
[* orange] Ambient light sensor
-[* black] Stacked beneath the light ring, we find the highly anticipated congestion-sensing antenna and radio. But we can't get it out just yet...

图片2

旧版本

新版本

图片3

旧版本

新版本