跳转到主内容

跳到步骤#2

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

-[* black] This LED ring will change colors based on what state the OnHub is in. Blue means you're ready to begin setup. [guide|13470|Orange] is for, “Oh snap, something is wrong." Green means you’re good to go!
- [* red] This mysterious anomaly is probably an ambient light sensor enabling dimming.
-[* black] No blinking router lights here, let's hope the constant status light isn't blinding in the dark.
+[* black] No blinking router lights here, let's hope the constant status light isn't blinding in the dark (it's not).
+ [* icon_note] This LED ring will change colors based on what state the OnHub is in. Blue means you're ready to begin setup. [guide|13470|Orange] is for, “Oh snap, something is wrong." Teal means you’re good to go!
+ [* red] This mysterious anomaly in the speaker grille is probably an ambient light sensor enabling dimming.
[* black] We also spy a small cutaway on the bottom of the cowling for the cabling.
- [* black] We're skeptical as to whether it's actually possible to fully populate these ports without having to smash some cables down to get the cowling back on. Even the power plug alone created some resistance as we replaced the cowling. Two extra ethernet cables and a USB cable could quickly turn this into a cable disaster.
+ [* black] A novel idea for cable management, but not great for ease-of-access. You've got to twist the cowling off to plug anything in.

图片1

旧版本

新版本

图片2

旧版本

新版本