跳到步骤#2
由 Mallory Arend — 编辑
- 之前
- 之后
- 不变
步骤行
- | [* yellow] Pry the spudger under the black latch, which is holding the ribbon in place. Lift gently with the spudger. |
---|---|
- | [* yellow] Slide the tip of the spudger inside the loop of tape. Pull upward with the spudger while removing the yellow plate. |
+ | [* icon_note] There is a ribbon to the bottom left of the silver plate. It is being held in place by a black latch. Pry the spudger under the black latch, Lift gently with the spudger. |
+ | [* yellow] Pry the spudger under the black latch and lift gently. The ribbon will release easily. |
+ | [* icon_note] There is a loop of tape to the bottom right of the silver plate. |
+ | [* yellow] Slide the tip of the spudger inside the loop of tape and pry upward while removing the yellow plate with your other hand. |