跳到步骤＃2
由 Mallory Arend — 编辑
- 之前
- 之后
- 不变
步骤行
| + | [* black] Pry the spudger under the black latch, which is holding the ribbon in place. Lift gently with the spudger. |
|---|---|
| + | [* black] Slide the tip of the spudger inside the loop of tape. Pull upward with the spudger while removing the yellow plate. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加