跳到步骤＃4
由 donald1oest — 编辑
编辑已通过 由 donald1oest
- 之前
- 之后
- 不变
步骤行
| [title] Separating the Digi flex from the LCD |
| [* black] After desoldering use a plastic superego in the exact area as the picture shows to loosen up the adhesive holding the dig flex in place. It's best if you use a small amount of heat, around 150F, to help soften the adhesive bond. Fold the dig cable back as shown in the second picture. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加