跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#3

donald1oest编辑

编辑已通过 由 donald1oest

已删除
已添加
不变

步骤行

[title] Desoldering the proximity sensor power supply
[* black] I used a solder iron tip that was larger than the solder pads. Turn your soldering iron up to a high temperature, 350C is where I kept mine at. DO NOT add any solder, just use the heat & tweezers to pull back the tabs. After unsoldering pull the flex cable out of the way and use tweezers to peel back the proximity sensor from the AMOLED. CAREFULLY.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加