跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#5

donald1oest编辑

编辑已通过 由 donald1oest

之前
之后
不变

步骤行

[title] Separating the AMOLED from the glass/digi
[* black] Insert wisdom here.Begin by preheating the entire screen to a uniform temp, letting it sit under warm air for 10 minutes. I keep my heat gun on 300F-350F while holding the screen 3"-6" away from the nozzle to vary the temperature. Carefully insert a business card under the screen on the dig flex side. Use alcohol to weaken the OCA tape bond then move the card in slow
[* black] Insert wisdom here.Begin by preheating the entire screen to a uniform temp, letting it sit under warm air for 10 minutes. I keep my heat gun on 300F-350F while holding the screen 3"-6" away from the nozzle to vary the temperature. Carefully insert a business card under the screen on the dig flex side. Use alcohol to weaken the OCA tape bond then move the card in slow