Skip to main content

Changes to Step #1

Edit by Ryan Godfrey

等待批准

Deleted
Added
Unchanged

Step Lines

[* yellow] Undo the two screws on the fan cover plate labeled "F3", they will remain in the panel.
[* icon_note] These screws will remain in the panel
[*
black] RemoveLift up on the side of the fan nearest the screws to release the fan module.module
[* icon_note] These screws will remain in the panel
[*
black] RemoveLift up on the side of the fan nearest the screws to release the fan module.module