跳转到主内容

跳到步骤#1

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

[* icon_note] Before proceeding, close your computer and lay it on a soft surface top-side down.
[* black] Remove the following ten screws:
- [* red] Two 9 mm Torx Plus screws
+ [* red] Two 9 mm 5-point Pentalobe screws
[* orange] Eight 2.6 mm 5-point Pentalobe screws
[* icon_note] The special screwdriver needed to remove the eight 5-point Pentalobe screws can be found [product|IF145-090|here].