跳转到主内容

跳到步骤#14

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

-[* red] Remove the five 2.5 mm T4 Torx screws securing the trackpad to the case.
- [* icon_note] Depending on which bit set you use, a T3 driver may fit better. Try both sizes, and use the largest driver that fits fully into the screw head.
+[* red] Remove the five 2.5 mm T3 Torx screws securing the trackpad to the case.
+ [* icon_note] Depending on which bit set you use, a T4 driver may fit better. Try both sizes, and use the largest driver that fits fully into the screw head.