跳转到主内容

跳到步骤#9

iRobot编辑

等待批准

之前
之后
不变

步骤行

+[* black] Remove the following three screws from the power supply:
+ [* red] One 4.8 mm T8 Torx screw on the left side of the power supply.
+ [* orange] Two 5.8 mm T8 torx screws attaching the power supply to the logic board.
+[* black] Lift the power supply out of the unit.

图片1

没有之前的图片

已添加