跳转到主内容

跳到步骤#2

iRobot编辑

等待批准

之前
之后
不变

步骤行

+[* black] Lift off the metal base, revealing the hard drive.
+[* black] Disconnect the ATA hard drive cable from the right side of the logic board. Try to pull straight up so you don't bend the pins on the hard drive.
+[* icon_note] The hard drive is mounted on the baseplate of the unit. It is a 40 GB 2.5" Fujitsu ATA drive (NOT an SATA drive). You can replace this drive with a standard ATA laptop drive if you want to upgrade it.

图片1

没有之前的图片

已添加