跳到步骤＃5
由 Miroslav Djuric — 编辑
- 之前
- 之后
- 不变
步骤行
| [* black] Grasp the end of the logic board near the battery connector with one hand, and hold onto the rest of the iPod with your other hand. |
| [* icon_note] Make sure the logic board is lifted slightly above the white plastic notch on the battery side of the board. This notch prevents the board from sliding out in the next step. |
| [* black] Slide the logic board out of its holding brackets on the rear of the display. |
| [* icon_note] The logic board is still connected to the iPod by two ribbon cables. |
图片1
没有之前的图片
已添加