跳到步骤＃4
由 Matthew Newsom — 编辑
- 之前
- 之后
- 不变
步骤行
| [* black] Use your fingernail or the edge of a spudger to flip up the retaining flap on the UMD ribbon socket. |
| [* black] Use your fingernail or edge of a spudger to push both sides of the black retaining bracket on the UMD laser ribbon socket to the right. |
| [* black] After flipping up the locking tabs on all four connectors, use your fingers or a spudger to gently pull the cables straight out of the connectors. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加