跳转到主内容

跳到步骤#4

Matthew Newsom编辑

等待批准

已删除
已添加
不变

步骤行

[* blackred] Use your fingernail or the edge of a spudger to flip up the retaining flap on the UMD drive ribbon socket.
[* blackicon_caution] Be sure you are prying up on the retaining flap, not the socket itself
[* yellow
] Use your fingernail or edgetip of a spudger to push both sides of the black retaining bracketflap on the UMD laser ribbon socket to the right.
[* black] After flipping up the locking tabs on both connectors, use your fingers orUse a spudger to gently pull theboth ribbon cables straight out of the connectorstheir sockets.
[* blackred] Use your fingernail or the edge of a spudger to flip up the retaining flap on the UMD drive ribbon socket.
[* blackicon_caution] Be sure you are prying up on the retaining flap, not the socket itself
[* yellow
] Use your fingernail or edgetip of a spudger to push both sides of the black retaining bracketflap on the UMD laser ribbon socket to the right.
[* black] After flipping up the locking tabs on both connectors, use your fingers orUse a spudger to gently pull theboth ribbon cables straight out of the connectorstheir sockets.

图片1

旧版本

新版本