跳转到主内容

跳到步骤#1

Calvin Laverty编辑

编辑已通过 由 Calvin Laverty

之前
之后
不变

步骤行

[* black] To the left of the middle speaker (the large black component in the middle of the device), there will be a couple of wires.
[* black] Use the tweezers to remove the piece of tape to free the wires.
[* black] Next, to the right of that piece of tape is black electrical tape that needs to be removed.
[* black] Use the tweezers to remove the piece of black tape.
-[* icon_reminder] Don't worry if you rip this piece as you can add a new piece when putting the speakers back.
+[* icon_reminder] Don't worry if you rip any tape as you can add a new piece when putting the speakers back.