Skip to main content

Changes to Step #3

Edit by Tobias Isakeit

编辑已通过 by Tobias Isakeit

Deleted
Added
Unchanged

Step Lines

[* black] The surrounding speaker component (the black box) around the power adapterinlet needs to be removed.
[* red] Use the TR 10 screwdriver to remove the four screws!screws.
[* blackorange] Disconnect the speaker from behind the PCB to not accidentally riplogic board by carefully pulling at the plastic end of the cable.
[* black] The surrounding speaker component (the black box) around the power adapterinlet needs to be removed.
[* red] Use the TR 10 screwdriver to remove the four screws!screws.
[* blackorange] Disconnect the speaker from behind the PCB to not accidentally riplogic board by carefully pulling at the plastic end of the cable.
[* black] Remove the speaker.

Image 2

Old Version

New Version

Image 3

Old Version

New Version