Skip to main content

Changes to Step #2

Edit by Calvin Laverty

编辑已通过 by Calvin Laverty

Deleted
Added
Unchanged

Step Lines

[* black] Next, there is a piece of electrical tape that is holding wires into the casing that are connected to the power adapter. Use the tweezers to remove this piece of tape.
[* black] The power adapter is connected by three 10 Torx screws. Use the appropriate screwdriver to remove these.
[* black] Keep these screws separate from the ones that were taken out during the removal of the LCD!

Image 1

No previous image

Added

Image 2

No previous image

Added