Skip to main content

Changes to Step #1

Edit by Tobias Isakeit

编辑已通过 by Tobias Isakeit

Deleted
Added
Unchanged

Step Lines

[* black] You should now see the AC power inletEMI filter right in the middle of the device (although held in by a few other components).
[* black] You should now see the AC power inletEMI filter right in the middle of the device (although held in by a few other components).
[* black] Follow the wires coming out of the bottom of the Power adapter off to the left.
[* black] Take the tweezers and remove the piece of tape holding the wires to the casing.
[* black] There is only one connector that needs to be taken out (even though there are two right next to each other!).
[* black] Grab the connector from the bottom and pull it carefully from its corresponding socket.