跳转到主内容

跳到步骤#3

William DiVittorio编辑

编辑已通过 由 William DiVittorio

之前
之后
不变

步骤行

-[* black] Weave the chain thru the rear derailleurs and connect the ends at the top of the cog set.
-[* black] Pull the chain at both ends of the masterlink, it should snap into place. If not, place the master link above the rear gear, hold the rear tire in place, and give the pedal a push. The stress on the chain should snap the master link into place.
+[* red] Weave the chain thru the rear derailleur, make sure to guide the chain thru the rear chain guard.
+[* black] It can be cramped, pulling down the derailleur can often be helpful.
+[* orange] The last image highlights the chains path thru the sprockets.
+[* green] Holding the end of the chain in place, proceed to step 5.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加