跳转到主内容

跳到步骤#18

Brittany McCrigler编辑

编辑已通过 由 Brittany McCrigler

已删除
已添加
不变

步骤行

[* black] On the left we see a row of dark coupling caps—probably in parallel.
[* black] While the board is relatively complex, it only appears to be one layer, with no components on the bottom of the board. (which makes sense because it needs to lay flat and charge).
[* red] With close inspection we spot a littler resistor network.
[* icon_note] Each filament in the network connects different points with a different resistor

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加