跳转到主内容

跳到步骤#12

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

已删除
已添加
不变

步骤行

[* black] more s1 closeups
[* black] you can make out the part number on this guy, cause it was the one exposed chip
[* black] We take a closer look at the flash memory.
[* black] The flash chip looks flipchiped onto a the substrate with the balls are on the front side. We are taken back by the patterning of the balls because it is so irregular.
[* black] LookingThe experts at Creative Electron tell us that by looking at the patterning on the chip itself, focusing on the directions of the connections and vias, it looks like this flash is made of four layers—two signals, power, and ground.
[* black] LookingThe experts at Creative Electron tell us that by looking at the patterning on the chip itself, focusing on the directions of the connections and vias, it looks like this flash is made of four layers—two signals, power, and ground.
[* black] Taking a closer look at the balls that connect the chip, we notice a few light-colored bubbles. This is called voiding.
[* black] Most contacts between boards are copper. But because copper oxidizes (rusts) very quickly, you have to wash it with an acid before you make the bond. This acid is called flux and is used to "wet" the tin solder. Voiding happens when the flux isn't completely cleaned off.
[* black] What's worse is it isDepending on its extent, this can be bad for durability. Clean, even connections allow heat to dissipate anddissipate, while [http://creative.creativeelectron.netdna-cdn.com/wp-content/uploads/2014/10/EconomicsofLEDVoiding.compressed.pdf|voiding allowallows for heat build up, thusup|new_window=true], reducing the life of components.|new_window=true]components.
[* black] What's worse is it isDepending on its extent, this can be bad for durability. Clean, even connections allow heat to dissipate anddissipate, while [http://creative.creativeelectron.netdna-cdn.com/wp-content/uploads/2014/10/EconomicsofLEDVoiding.compressed.pdf|voiding allowallows for heat build up, thusup|new_window=true], reducing the life of components.|new_window=true]components.

图片1

旧版本

新版本