跳转到主内容

跳到步骤#8

Brittany McCrigler编辑

编辑已通过 由 Brittany McCrigler

已删除
已添加
不变

步骤行

[* black] X-ray vision reveals the secrets of board-level components. Here you can clearly see some basic electronic components:
[* red] Inductors reveal their wire coils.
[* orange] Capacitors remain dark and elusive with all their wrapped layers.
[* yellow] Resistors are almost invisible, except for the solder pads that flow upmelts and creates a fillet on the sidesedges of the resistor itselfresistor.
[* yellow] Resistors are almost invisible, except for the solder pads that flow upmelts and creates a fillet on the sidesedges of the resistor itselfresistor.
[* green] Invisible crystals are hidden beneath their protective walls, but still remain close to the processor to help increase speed.
[* black] While all the dots and swirls may look like single-celled organisms—they are not. The swirly lines are a close up of the wire coils of the inductive charger. The larger, dark blobs are solder mounts for the chip, and the wavy grey background pattern is the flash memory chip. We'll take closer look at that in a minute.