跳转到主内容

跳到步骤#8

Sam Goldheart编辑

编辑已通过 由 Sam Goldheart

已删除
已添加
不变

步骤行

[* black] X-ray vision reveals the secrets of board-level components. Here you can clearly see some basic electronic components:
[* red] Inductors[http://en.wikipedia.org/wiki/Inductor|Inductors|new_window=true] reveal their wire coils.
[* orange] Capacitors[http://en.wikipedia.org/wiki/Capacitor|Capacitors|new_window=true] remain dark and elusive with all their wrapped layers.
[* yellow] Resistors[http://en.wikipedia.org/wiki/Resistor|Resistors|new_window=true] are almost invisible, except for the solder that melts and creates a fillet on the edges of the resistor.
[* green] Invisible crystals[http://en.wikipedia.org/wiki/Crystal_oscillator|crystals|new_window=true] are hidden beneath their protective walls, but still remain close to the processor to minimize latency and signal interference.
[* blackicon_note] While all the dots and swirls in the second image may look like single-celled organisms—they are not.
[* black]
The swirly linesswirls are a close up of the wire coils of the inductive charger. The largerlarge, dark blobs are solder mounts for thea chip, and the wavy grey background pattern is the flash memory chip. We'll take closer look atMore on that in a minutelater...
[* red] Inductors[http://en.wikipedia.org/wiki/Inductor|Inductors|new_window=true] reveal their wire coils.
[* orange] Capacitors[http://en.wikipedia.org/wiki/Capacitor|Capacitors|new_window=true] remain dark and elusive with all their wrapped layers.
[* yellow] Resistors[http://en.wikipedia.org/wiki/Resistor|Resistors|new_window=true] are almost invisible, except for the solder that melts and creates a fillet on the edges of the resistor.
[* green] Invisible crystals[http://en.wikipedia.org/wiki/Crystal_oscillator|crystals|new_window=true] are hidden beneath their protective walls, but still remain close to the processor to minimize latency and signal interference.
[* blackicon_note] While all the dots and swirls in the second image may look like single-celled organisms—they are not.
[* black]
The swirly linesswirls are a close up of the wire coils of the inductive charger. The largerlarge, dark blobs are solder mounts for thea chip, and the wavy grey background pattern is the flash memory chip. We'll take closer look atMore on that in a minutelater...

图片2

旧版本

新版本

图片3

已删除