跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#1

mayer编辑

编辑已通过 由 mayer

之前
之后
不变

步骤行

[* red] Remove the single triwing screw securing the Force Touch sensor connector cable.
[* black] As the screw is on the vertical wall of the inside of the case, you may want to use a driver extension to make your driver a little thinner and get a better angle on the screw.[product|IF145-309]
[* black] As the screw is on the vertical wall of the inside of the case, you may want to use a driver extension to make your driver a little thinner and get a better angle on the screw.[product|IF145-309]
[* icon_note] This screw is very small and strips easily, take care to operate at a proper angle and push as you turn.