跳转到主内容

跳到步骤#5

Angela Penaherrera编辑

编辑已通过 由 Angela Penaherrera

之前
之后
不变

步骤行

+[* black] With the help of a syringe or anything that can suction liquid, clean the remaining ink from the tube.
+[* black] I also went ahead and cleared the pad from as much ink as I could, it can buy you a bit more life span to the pad if you are in a hurry to print and not have the replacement items for this hack.
+[* icon_note] I did not have a syringe at the time and used a desolder pump, takes way longer though.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加