跳转到主内容

跳到步骤#4

wahooza编辑

编辑已通过 由 Jake Devincenzi

已删除
已添加
不变

步骤行

[* blue] Use a spudger or a flathead screwdriver and carefully pry out the first flash cable from the bottom of the cable. The white 2 prong power cable pops UP (use spudger below red/black insertion and put upward pressure). For the yellow one, apply pressure horizontally.
[* blue] Use a spudger or a flathead screwdriver and carefully pry out the first flash cable from the bottom of the cable. The white 2 prong power cable pops UP (use spudger below red/black insertion and put upward pressure). For the yellow one, apply pressure horizontally.
[* green] Next use a spudger or a flathead screwdriver and carefully pry out the second flash cable.