跳转到主内容

跳到步骤#4

Samantha Taylor编辑

编辑已通过 由 Samantha Taylor

已删除
已添加
不变

步骤行

[* black] Locate the two ribbons connected to the camera and the LCD screen. One is shown here located in red. The other is shown in the previous step located in blue.
[* black] Remove the top left ribbon, locatedribbon (located in blue in Step 8, first8) by gripping the connector and sliding it straight out.
[* black] Second, remove the bottom ribbon, locatedribbon (located in red in,in) by gripping the connector and sliding it straight out.
[* black] Remove the top left ribbon, locatedribbon (located in blue in Step 8, first8) by gripping the connector and sliding it straight out.
[* black] Second, remove the bottom ribbon, locatedribbon (located in red in,in) by gripping the connector and sliding it straight out.
[* icon_note] Tweezers may be necessary to grip the connectors. Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later.
[* black] '''NOTE''': When reassembling, use tweezers to reconnect small ZIF (Zero Insertion Force) on top of screen.
[* black] '''NOTE''': When reassembling, use tweezers to reconnect small ZIF (Zero Insertion Force) on top of screen.