跳转到主内容

跳到步骤#4

Jacob编辑

编辑已通过 由 Jacob

已删除
已添加
不变

步骤行

[* black] Locate the two ribbons connected to the camera and the LCD screen. One is shown here located in red. Thered the other is shown in the previous step located in blueorange.
[* blackred] Remove the top left ribbon (located in blue in Step 8) by gripping the connector and sliding it straight out.
[* black] Second, removeorange] Remove the bottomside ribbon (located in red in) by gripping the connector and sliding it straight out.
[* black] Locate the two ribbons connected to the camera and the LCD screen. One is shown here located in red. Thered the other is shown in the previous step located in blueorange.
[* blackred] Remove the top left ribbon (located in blue in Step 8) by gripping the connector and sliding it straight out.
[* black] Second, removeorange] Remove the bottomside ribbon (located in red in) by gripping the connector and sliding it straight out.
[* icon_note] Tweezers may be necessary to grip the connectors. Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later.
[* black] '''NOTE''': Whenicon_note] When reassembling, use tweezers to reconnect small ZIF (Zero Insertion Force) on top of screen.
[* black] '''NOTE''': Whenicon_note] When reassembling, use tweezers to reconnect small ZIF (Zero Insertion Force) on top of screen.

图片1

旧版本

新版本

图片2

没有之前的图片

已添加