跳转到主内容

跳到步骤#4

Jacob Abrego编辑

编辑已通过 由 Jacob Abrego

已删除
已添加
不变

步骤行

[* black] Locate the two ribbons connected to the camera and the LCD screen. (One is red and small and the other is wide and orange)
[* [* red] Remove the top left red ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
blue] Remove the side orange ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
icon_note] Note: It may be helpful to use tweezers when removing the connectors. (Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later)
[* [* red] Remove the top left red ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
blue] Remove the side orange ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
icon_note] Note: It may be helpful to use tweezers when removing the connectors. (Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later)
[* icon_note] Note: When reassembling, use tweezers to reconnect the small red connector on the top left of the screen.

图片1

旧版本

新版本

图片2

旧版本

新版本