跳转到主内容

跳到步骤#4

Jacob Abrego编辑

编辑已通过 由 Jacob Abrego

已删除
已添加
不变

步骤行

[* black] Locate the two ribbons connected to the camera and the LCD screen. One(One is in red and small and the other is in orange. wide and orange)
[* red] Remove the top left red ribbon by by gripping the connector on the camera and sliding it straight out.
[* orangeblue] Remove the side orange ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
icon_note] TweezersNote: It may be necessaryhelpful to gripuse tweezers when removing the connectors. Pay(Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later.later)
[* icon_note] Note: When reassembling, use tweezers to reconnect the small ZIF (Zero Insertion Force)red connector on the top left of the screen.
[* black] Locate the two ribbons connected to the camera and the LCD screen. One(One is in red and small and the other is in orange. wide and orange)
[* red] Remove the top left red ribbon by by gripping the connector on the camera and sliding it straight out.
[* orangeblue] Remove the side orange ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
icon_note] TweezersNote: It may be necessaryhelpful to gripuse tweezers when removing the connectors. Pay(Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later.later)
[* icon_note] Note: When reassembling, use tweezers to reconnect the small ZIF (Zero Insertion Force)red connector on the top left of the screen.

图片2

旧版本

新版本