Skip to main content

Changes to Step #1

Edit by Jeff Carter

等待批准

Deleted
Added
Unchanged

Step Lines

[* black] Use the Torx screwdriver with the T6 attachmet to remove the 6 .4 mm screws around the outside of the circuit board.
[* icon_note] Note: Removing the 4 .4 mm T6 screws around the screen will loosen it, so don't worry if the screen also separates from the circuit board.
[* black] Use the Torx screwdriver with the T6 attachmet to remove the 6 .4 mm screws around the outside of the circuit board.
[* icon_note] Note: Removing the 4 .4 mm T6 screws around the screen will loosen it, so don't worry if the screen also separates from the circuit board.