跳转到主内容

跳到步骤#1

James Loy编辑

等待批准

已删除
已添加
不变

步骤行

[* red] Locate two more ZIF connectors on the front of the motherboard. The first is a black connector directly below the lens. The second is a brown connector on the side of the lens.
[* black] Use the Spudger to rotate the black ZIF connector tab up and pull the connectorribbon out that it was holding.
[* black] Use the Spudger and pull each end of the brown ZIF connector tab directly out in the direction that the ribbon is going. You must unlatch both ends before the connector can pull out. Once both ends are unlatched, pull ribbon cable out.
[* red] Locate two more ZIF connectors on the front of the motherboard. The first is a black connector directly below the lens. The second is a brown connector on the side of the lens.
[* black] Use the Spudger to rotate the black ZIF connector tab up and pull the connectorribbon out that it was holding.
[* black] Use the Spudger and pull each end of the brown ZIF connector tab directly out in the direction that the ribbon is going. You must unlatch both ends before the connector can pull out. Once both ends are unlatched, pull ribbon cable out.